Καλή τιμή.  σε απευθείας σύνδεση

λεπτομέρειες για τα προϊόντα

Σπίτι > προϊόντα >
μετρητής δόνησης
>
HG5003 Vibration Calibrator Vibration Meter Measuring Instruments

HG5003 Vibration Calibrator Vibration Meter Measuring Instruments

Ονομασία μάρκας: HUATEC
Αριθμός μοντέλου: HG5003
MOQ: 1 τεμ
Λεπτομέρειες συσκευασίας: Τυπικό πακέτο εξαγωγής
Όροι πληρωμής: T/T, PayPal, Western Union
Λεπτομερής Πληροφορία
Τόπος καταγωγής:
το Πεκίνο
Πιστοποίηση:
ISO, CE, GOST
Ακρίβεια:
5%
Αμβέλεια επιτάχυνσης (RMS):
90,81m/s2 ((1g) ± 3%
Κυματομορφή εξόδου:
Σχήμα κύματος sinus
Διαστρέβλωση κυματοειδούς:
5%
Μέγιστο φορτίο:
120Gram
Θερμοκρασία εργασίας:
0-55 oC
Δυνατότητα προσφοράς:
500pcs το μήνα
Επισημαίνω:

portable vibration meter

,

digital vibration meter

Περιγραφή του προϊόντος

 

HG5003 Vibration Calibratorcan be used to calibrate small vibration transducers and also vibration measuring instruments

 

 

HG5003 Vibration Calibrator

HG5003 Vibration Calibrator Vibration Meter Measuring Instruments 0

General Description

HG5003 Vibration Calibrator can be used to calibrate small vibration transducers and also vibration measuring instruments and vibration monitoring systems quickly. Standard sine signals with fixed frequency 159.2Hz and fixed amplitude is generated from the calibrator.

HG5003 Vibration Calibrator combines sine signal generator, power amplifier, standard transducer and shaker in one and features a smaller volume, high accuracy and easy operation. It can be used either in laboratory or on site.

Specifications

  • Accuracy: 5%
  • Acceleration Amplitude(RMS):9.81m/s2(1g)±3%
  • Velocity Amplitude (RMS):9.81mm/s±3%
  • Displacement Amplitude (RMS):9.81µm±3%
  • Vibration Frequency:159.2Hz±0.5%
  • Output waveform: Sine waveform
  • Waveform distortion:£5%
  • Maximum Load: 120Gram
  • Battery: 9V rechargeable, Need 15 hours for fully charge
  • Can make the device work for 1.5 hours
  • Automatic power off time: 50seconds.
  • Working temperature: 0-55 oC
  • Size:Φ52×160mm
  • Weight: 600 gram (with batteries)
  • Tapped hole for sensor installation: M5 x 30mm

Operation

 


1

Fix M5 screw, accelerometer on the shaker table of the calibrator

 

2

Press the only switch at the calibrator to start the vibration.

 

3

Compare the reading of your vibration meter before the shaker power off after 50sec.

 

4

The LED will turn from GREEN to ORANGE when battery low. It means you need to recharge the battery for 15 hours.

Αξιολογήσεις & Κριτικές

Συνολική αξιολόγηση

5.0
Με βάση 50 κριτικές για αυτόν τον προμηθευτή

Εικόνα βαθμολόγησης

Παρακάτω παρουσιάζεται η κατανομή όλων των αξιολογήσεων
5 Αστέρια
100%
4 Αστέρια
0%
3 Αστέρια
0%
2 Αστέρια
0%
1 Αστέρια
0%

Όλες οι κριτικές

1
12
Brazil Oct 29.2025
123