Καλή τιμή.  σε απευθείας σύνδεση

λεπτομέρειες για τα προϊόντα

Σπίτι > προϊόντα >
Ανιχνευτής υπερήχων
>
Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE

Ονομασία μάρκας: HUATEC
Αριθμός μοντέλου: HFD UL
MOQ: 1 τεμ
Λεπτομέρειες συσκευασίας: Τυπικό πακέτο εξαγωγής
Όροι πληρωμής: T/T, PayPal, Western Union
Λεπτομερής Πληροφορία
Τόπος καταγωγής:
το Πεκίνο
Πιστοποίηση:
ISO, CE, GOST
Εύρος Συχνοτήτων:
12από 0,5 MHz έως 10 MHz
Μετατροπέας επαφής:
διαφόρων μεγεθών στοιχείων
Προστατευμένος μετατροπέας προσώπου:
με φιλμ ή παπούτσια
Μετατροπέας δύο στοιχείων:
Διπλό στοιχείο
Κλινοειδής σφήνα:
ΑΕΠ ΑΕΠ ΑΕΠ ΑΕΠ
Υλικό:
πλαστικό, αλουμίνιο, κράμα
Δυνατότητα προσφοράς:
5000pcs το μήνα
Επισημαίνω:

ultrasonic flaw detectors

,

ultrasonic flaw detection

,

digital ultrasonic flaw detector

Περιγραφή του προϊόντος

 

Ultrasonic ndt equipment Ultrasonic Inspection Equipment Probe Transducer Phased Array Prob

 

1. Straight probe: single crystal p-wave straight probe double crystal p-wave straight probe

 

2. The Angle probe: single crystal shear Angle probe a1 < aL < a Ⅱ, twin shear Angle probe

 

Single-crystal p-wave oblique probe aL

AL is a climbing wave probe near a1. The longitudinal wave transmitted along the surface of the workpiece has the advantages of fast speed, high energy, long wavelength, deeper detection depth than the surface wave, and the requirement for the surface finish of the workpiece is higher than that of the surface wave (frequency 2.5mhz wavelength about 2.4mm).

 

3. Probe with curvature: circumferential curvature, radial curvature.

 

The circumferential curvature probe is suitable for the detection of axial defects in seamless steel tubes, straight welded tubes, tubular forgings and axial workpieces. When the diameter of the workpiece is less than 2000mm, the circumferential curvature of the probe shall be ground to ensure good coupling.

 

Radial curvature probe is suitable for the detection of radial defects in seamless steel pipe, butt weld of steel pipe, barrel forging, shaft workpiece, etc. When the workpiece diameter is less than 600mm, the radial curvature of the probe should be ground to ensure good coupling.

 

4. Focusing probe: point focusing line focusing.

 

5. Surface wave probe :(when the incident Angle of the longitudinal wave is greater than or equal to the second critical Angle, the transverse wave refraction Angle is equal to 90 to form a surface wave).

 

The transverse wave transmitted along the workpiece surface has a slow speed, low energy and short wavelength, and the detection depth is shallower than the crawling wave. Therefore, the requirements for the surface finish of the workpiece are stricter than the crawling wave.

 

Surface wave detection can only detect defects at a depth of two wavelengths from the surface of the workpiece. (frequency 2.5mhz wavelength about 1.3mm).

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 0

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 1

 

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 2

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 3

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 4

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 5

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 6

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 7

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 8

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 9Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 10

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 11

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 12

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 13

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 14

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 15

Αξιολογήσεις & Κριτικές

Συνολική αξιολόγηση

5.0
Με βάση 50 κριτικές για αυτόν τον προμηθευτή

Εικόνα βαθμολόγησης

Παρακάτω παρουσιάζεται η κατανομή όλων των αξιολογήσεων
5 Αστέρια
100%
4 Αστέρια
0%
3 Αστέρια
0%
2 Αστέρια
0%
1 Αστέρια
0%

Όλες οι κριτικές

1
12
Brazil Oct 29.2025
123
Συγγενικά προϊόντα
Astm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2 Βίντεο
Intelligent Digital Multi Channel Ultrasonic Flaw Detector In Physics Βίντεο
Βρείτε την καλύτερη τιμή
Bnc To Bnc Cable Ultrasonic Probe For Ndt Ultrasonic Equipment Βίντεο
Βρείτε την καλύτερη τιμή
Universal Ultrasonic Flaw Detector With LED Backlight Bright Color Display USMFD34035X Βίντεο